ISO Compliance Check Tool
Upload your design, specification, or process document. Specify the standard. Get specific compliance gaps with exact clause references and corrective actions — ready before your audit.
Check Your Compliance FreeNo credit card required · Free plan includes 10 analyses/day
Supported standards
Major engineering standards covered
ISO 9001
Quality management systems — manufacturing and supplier audits
ISO 13485
Medical device quality management and design control
ISO 14971
Medical device risk management and FMEA requirements
ASME Y14.5
GD&T dimensioning and tolerancing standard
ISO 2768
General tolerances for linear and angular dimensions
IEC 61508
Functional safety of electrical/electronic/programmable systems
AS9100
Aerospace quality management systems
IATF 16949
Automotive quality management — DFMEA and PFMEA requirements
More than a checklist
ForgePilot reads your actual documents and identifies specific gaps — not generic reminders.
Specific clause references
Every compliance gap is mapped to an exact standard clause — not just 'this may not meet ISO 9001' but 'Clause 8.3.3 requires documented design inputs; none found in submission.'
Instant gap analysis
Upload your design document, SOP, test plan, or specification. ForgePilot cross-references it against the stated standard and returns a gap list in seconds.
Corrective action per gap
Each compliance gap includes a specific corrective action — what document to create, what procedure to add, or what design change to make to close it.
Upload any document format
PDF specs, Word documents (as PDF), CSV checklists, and engineering drawings. ForgePilot reads the content and checks it against the standard.
Iterative compliance review
Revise your document, re-upload, and run another check in the same session. Full context is maintained — ForgePilot knows what changed.
Export compliance report
Export the full gap list and corrective actions as a formatted PDF or Markdown report, ready for an internal audit or regulatory submission.
Frequently asked questions
What engineering standards does ForgePilot check against?
ForgePilot supports ISO 9001, ISO 13485, ISO 14971, ASME Y14.5, ISO 2768, IEC 61508, AS9100, IATF 16949, and more. Just specify the standard you need and upload your document or design.
Is this a replacement for a formal compliance audit?
No — ForgePilot is an engineering analysis tool, not a certified audit body. It accelerates your compliance preparation by identifying gaps and generating evidence before a formal audit. Engineers use it to self-audit before submitting to a notified body or registrar.
Can it check a design drawing for compliance?
Yes. Upload a PDF drawing or CAD file and specify the standard (e.g., ASME Y14.5 for GD&T, ISO 2768 for general tolerances). ForgePilot checks the document content against the standard requirements.
How is this different from a compliance checklist?
A checklist tells you what to check. ForgePilot reads your actual document and tells you which specific requirements are missing, incorrectly stated, or undocumented — with the clause reference and the fix. It does the reading, not just the prompting.
Check your compliance before the audit
Upload your documents, specify your standard, and get specific gaps with clause references and corrective actions — in seconds.
Launch Workspace Free10 free analyses per day · No credit card required